Single Rotary Axis Feedthrough, FRMRE-275-38/MS-SCC
(shown with optional /MS-SCC motor drive)
Dual Axis Rotary Feedthrough, FRRMRE-275-75-38/MS-SCC
(model shown here with manually operated outer shaft and
optional /MS-SCC motor-driven inner shaft)
Description
The rare earth magnetic series single and dual rotary drives are designed to provide exceptional, long life performance. They are UHV compatible and are an excellent option to conventional bellows-sealed and other rotary devices. They can be adapted to PLD target clocking and continuous rotation of targets and substrates, as well as applications which require small profiles and high performance.
There are no sliding seals or magnets in vacuum and stray magnetic fields are virtually nonexistent. The in-vacuum armature is made of paramagnetic materials with stainless steel and silicon nitride bearings and is capable of repeated bakeout to 200°C (with magnets removed). Out-of-vacuum bearings are accessible for lubrication and the magnet drive is easily removable.
Magnetically-Coupled Rotary Feedthrough
FRMRE-275-38
- 3/8" rotating probe
- 2.75" O.D. mounting flange
- Manual drive knob with position lock
- 4,000,000 revolutions before internal bearing service
- Maximum bakeout temperature: 200°C (magnetic drive removed)
- Mechanical torque limit: 150 oz/in
- Maximum speed: 500 rpm
- Removable neodynium iron boron magnetic drive for bakeout
FRMRE-275-38 Single Axis Rotary Magnetic Drive
Dual Rotary Magnetically-Coupled Feedthrough
FRRMRE-275-75-38
Ideal for PLD target gearboxes
- 3/4" and 3/8" rotating shafts
- 2.75" O.D. mounting flange
- One or both rotary shafts can be motorized (see options below)
- Manual adjustment of 3/4" diameter shaft with position lock
- 4,000,000 revolutions before internal bearing service
- Maximum bakeout temperature: 200°C (magnetic drive removed)
- Mechanical torque limit: 150 oz/in
- Removable neodynium iron boron magnetic drive for bakeout
FRRMRE-275-75-38/MS-SCC (shown with optional /MS-SCC
speed control motor drive on 0.38" shaft)
Ordering Information
Magnetically Coupled Single and Dual Rotary Feedthroughs
| Drive Type |
Model No. |
|
|
|
|
|
| Single rotary drive |
FRMRE-275-38 |
|
|
|
|
| Dual rotary drive |
FRRMRE-275-75-38 |
|
|
|
|
Options
MOTORIZATION OPTIONS
/MS Stepping Motor Drive
Model No.: /MS
Applications: precise positioning, positioning multiple axes at one time, computer-controlled actuation
- 200 steps per revolution
- 50 oz-in holding torque (higher torque motors available)
- Maximum speed 300 rpm
- Low inertia design
- Manual knob
- Motor controller sold separately
/MY Synchronous Motor Drive
Model
No.: /MY
Applications: coarse positioning, continuous rotation
- Single speed, 72 rpm
- 2 directions
- 50 oz-in holding torque (higher torque motors available)
- Low inertia design
- Manual knob
- Motor controller sold separately
TMC Stepping or YMC Synchronous Motor Controllers
For more information see the TMC Stepping or YMC Synchronous motor controllers.
FRMRE-275-38/MS-SCC
(shown with optional /MS-SCC speed control motor drive)
/MS-SCC Speed Control Motor Drive
Model
No.: /MS-SCC
Applications: continuous rotation with variable speed, no position feedback
FRRMRE-275-75-38/MS/MS-SCC (shown with optional
/MS stepping motor drive and /MS-SCC speed control motor drive),
commonly used for PLD applications