Our online catalog is being updated! Please contact us for current pricing. Gate Valve Part Finder Not finding the exact valve configuration you need on our Pricing & Specifications page? Use the Part Finder on this page to build a valve to your exact specifications, and print-out a request for quote. Select your valve configuration options from the list below. The Wizard will then generate a Thermionics model number representing the requirements of your valve. The diagram on the right-hand side of this page shows you the various feature groups that are available for our valve products. For more information about any of the feature groups, click on the "info" button. Then come back here to finish building your valve. Here is the order number for the valve described below: Port Size 5/8" 1-1/2" 2" 2.5" 3" 4" 5" 6" 8" 10" 12" ? Actuator None *Manual Pneumatic Motorized Special/describe Solenoid *None 120 VAC/60Hz 220 VAC/60Hz 12 VDC 24 VDC Special/describe Position Indicators *None Reed Microswitch Type A Microswitch Type B Special/describe Bonnet Flanges None *Viton seal PyraFlat flat copper gasket seal Wire seal Special/describe Port Flanges None *ConFlat type PyraFlat flat copper gasket seal ASA (a) ISO Special/describe Type of O-Ring in Gate None *Viton Kalrez Buna Polymide Special/describe Actuator Shaft Seal None *Formed bellows Welded bellows O-ring seal Special/describe Window in Gate *None Pyrex Quartz Sapphire Special/describe Special *None 133-075 ConFlat roughing port 275-150 ConFlat roughing port 338-200 ConFlat roughing port 450-250 ConFlat roughing port ISO 25-0.75 ISO roughing port ISO 40-1.5 ISO roughing port ISO 50-2.0 ISO roughing port ISO 63-205 ISO roughing port Special/describe * denotes the "standard feature" in a feature group Note: (a) ASA Port Flange does not include o-ring groove. Please specify o-ring groove, if required. Suggested Gate Valve Part: