Our online catalog is being updated! Please contact us for current pricing. SPF Dual Groove Disc System SPF Series Dual Groove Disc SystemThe SPFP sample platen has two grooves around its perimeter. The SPFF sample fork has a counter-bored receiver machined into the fork's prongs. The prongs slide into the grooves of the platen and the platen is lowered into the counter-bored receiver. The SPFD dock has the same configuration as the fork and uses the second groove on the platen for docking. Docks using hold-down rails are also available. Features Available from 1" diameter to 6" diameter or larger puck. Sample lock onto transfer probe via gravity or spring load.       Dual groove, allowing direct transfer of sample from one transfer arm to another, running at a different angle. Easily adapts to magazine multiple loading. Requires sample disk thickness of approximately 0.5". Usually limited to side loading. Transfer Requirements for Actuation Transfer probe requirement is a horizontal probe with SPF fork, capable of linear motion from the side of the sample. Short vertical travel is required to uncouple/recouple the sample. This can be supplied by a tilt stage at the linear probe mounting flange, or by vertical motion of the sample dock (i.e. manipulator). This action can be supplied by: RPL series rack and pinion linear feedthroughs Z motion translators FLLRE series linear-rotary feedthroughs RPLR series rack and pinion linear-rotary feedthroughs FLRM series push-pull linear-rotary feedthroughs Transfers of up to 60" can be easily obtained without intermediate support. Ordering Information -- SPF Series Sample Handling Systems All stainless steel construction Sample size: 0.4" Sample size: 1.0" Sample size: 3.0" Type Model No. Price Type Model No. Price Type Model No. Price Platen SPFP-0.4 $110. Platen SPFP-1 $125. Platen SPFP-3 $225. Transfer Grip SPFF-0.4 $250. Transfer Grip SPFF-1 $250. Transfer Grip SPFF-3 $270. Dock SPFD-0.4 $310. Dock SPFF-1 $310. Dock SPFD-3 $380.